News
CONTACT US
National Marketing Hotline:
International Sales Hotline:
After-sales Hotline:
Contact Email:
Contact Address:
NO.977 Qingwei Road, Jimo District, Qingdao City
Matters needing attention in the use of concrete mixer truck
Release time:
2025-09-10
Data source:
Concrete mixer truck is a special vehicle for transporting concrete.The slow rotation of the agitator can effectively prevent the concrete from initial setting and segregation and thus ensure the concrete transportation.
Concrete mixer truck is a special vehicle for transporting concrete.The slow rotation of the agitator can effectively prevent the concrete from initial setting and segregation and thus ensure the concrete transportation.
1. The hydraulic oil pressure, oil quantity, oil quality and oil temperature of the hydraulic transmission system of the mixer truck shall meet the specified requirements without leakage.
2. During mixing transportation, the loading quantity of concrete shall not exceed the allowed loading quality.
3. When the mixer truck is parked in the open air, the stirring barrel should be reversed before loading, so that the water and debris inside the drum can be discharged.Before loading, it is better to add a little water to the inlet to make the feed flow smoothly and prevent the adhesive.
4. During the driving of the mixer truck, the unloading groove with the length of connection must be turned over and fixed on the unloading groove, and then transferred to the vertical position with the body. The pin shaft and the rack shall be fixed to prevent the swing caused by unfixation, which may hurt pedestrians or affect the operation of the vehicle.
5. When passing the bridge, hole, warehouse and other facilities, the mixer truck should pay attention to the height and width to avoid collision.It should be noted that the length of the current four-axle tank car is very long. When the height of the bridge hole is close to the limit, the long body is a string on the road surface of the lower arc. The height of the passing car will be reduced.
6. The continuous operation time of mixer truck shall not exceed 8 hours.
Other News
Proper maintenance is essential for ensuring stable concrete discharge, minimizing downtime, and extending the service life of a pump truck.
How to Prevent Concrete Pump Truck Overturning: 4 Essential Safety Measures
Key points to help prevent small concrete pump trucks from tipping over.
Prevent Concrete Pump Blockages and Life-Threatening Safety Hazards: Do Not Pump These Materials
To help construction teams standardize operations, extend equipment lifespan, and mitigate risks, we have compiled a list of materials that must never be pumped using concrete delivery pumps.
A High-Performance Powerhouse for Faster Concrete Pouring: JIUHE Trailer Concrete Pumps
With over two decades of expertise in pumping equipment, Jiuhe Heavy Industry leverages cutting-edge technology to refine a comprehensive range of concrete pumps.
Operational Details for Trailer Type Concrete Conveying Pumps
Based on years of R&D and manufacturing experience, Jiuhe Heavy Industry identifies the following key operational details for small concrete delivery pumps:
JIUHE Truck-mounted concrete pump
With the rapid development of the construction industry, methods for transporting concrete are constantly evolving. In the past, stationary concrete pumps (or "trailer concrete pumps") were the primary method, but truck-mounted concrete pumps ( also called "concrete line pump" )have now gradually become the mainstream choice.
Precautions for the Use of Trailer Mounted Concrete Pumps
The trailer-mounted concrete pump is a very common piece of construction equipment; favored by contractors for its compact size, ease of transport, and cost-effectiveness.
What causes the S-pipe of a concrete pump to not swing properly?
The S-tube is a crucial component of a concrete boom pump. Its primary function is to connect the boom's piping to the concrete delivery cylinder, enabling continuous concrete pumping.