News
CONTACT US
National Marketing Hotline:
International Sales Hotline:
After-sales Hotline:
Contact Email:
Contact Address:
NO.977 Qingwei Road, Jimo District, Qingdao City
The secret of preventing the side turn of the pump truck
Release time:
2025-08-15
Data source:
The tilt device for measuring the vehicle's level and the sensor for measuring the pressure on the supporting leg.The tilt sensor can sense the vehicle's level and send real-time horizontal Angle information, which can effectively avoid the tilting caused by ground slow decline.The function of the tilt sensor is to measure the tilt Angle of the vehicle in real time.The measurement accuracy of the tilt sensor is higher than 0.05 degrees.It can filter out small tremors caused by engine and pump tremors and trigger alarm when the Angle of left and right is greater than 3 degrees or the Angle of front and rear is greater than 5 degrees.
The tilt device for measuring the vehicle's level and the sensor for measuring the pressure on the supporting leg.The tilt sensor can sense the vehicle's level and send real-time horizontal Angle information, which can effectively avoid the tilting caused by ground slow decline.The function of the tilt sensor is to measure the tilt Angle of the vehicle in real time.The measurement accuracy of the tilt sensor is higher than 0.05 degrees.It can filter out small tremors caused by engine and pump tremors and trigger alarm when the Angle of left and right is greater than 3 degrees or the Angle of front and rear is greater than 5 degrees.
2. Force sensor of the supporting leg detects the pressure of each supporting leg in real time. When the pressure of two supporting legs of one side is less than a certain value, it timely make a warning or terminates the current action.What needs to be added is that artificial intelligence is never omnipotent. This kind of axial gravity sensor can only sense the pressure situation in a certain direction. Due to the different vertical degree of the whole vehicle and the supporting legs when pumping, the authenticity of the force condition detected is not enough. There is a possibility of false or missing signals.
3. There are many factors causing the dump of the pump truck. In addition to necessary protective measures, it is particularly important to make human judgment and on-site experience of operators.A good operator is better than any intelligent device.The following faults are more likely to occur, which can only be avoided according to the operator's experience.
1. Soft ground
2. Hollow ground
3. Field work
4. Don't be careless on the edge field
5.Avoid dangerous road conditions
Iv. Correct placing range: there are four types of placing for the pump truck: full placing mode, front placing mode, left placing mode and right placing mode.To enhance the vehicle safety factor, prevent the rear vehicle tilt when placing, when the boom to the rear bodywork placing, boom Angle and the center line of the car + / - 12.5 ° not allowed within the scope of placing, two boom level restrictions prohibit cloth distance is 6501 mm.
Other News
Proper maintenance is essential for ensuring stable concrete discharge, minimizing downtime, and extending the service life of a pump truck.
How to Prevent Concrete Pump Truck Overturning: 4 Essential Safety Measures
Key points to help prevent small concrete pump trucks from tipping over.
Prevent Concrete Pump Blockages and Life-Threatening Safety Hazards: Do Not Pump These Materials
To help construction teams standardize operations, extend equipment lifespan, and mitigate risks, we have compiled a list of materials that must never be pumped using concrete delivery pumps.
A High-Performance Powerhouse for Faster Concrete Pouring: JIUHE Trailer Concrete Pumps
With over two decades of expertise in pumping equipment, Jiuhe Heavy Industry leverages cutting-edge technology to refine a comprehensive range of concrete pumps.
Operational Details for Trailer Type Concrete Conveying Pumps
Based on years of R&D and manufacturing experience, Jiuhe Heavy Industry identifies the following key operational details for small concrete delivery pumps:
JIUHE Truck-mounted concrete pump
With the rapid development of the construction industry, methods for transporting concrete are constantly evolving. In the past, stationary concrete pumps (or "trailer concrete pumps") were the primary method, but truck-mounted concrete pumps ( also called "concrete line pump" )have now gradually become the mainstream choice.
Precautions for the Use of Trailer Mounted Concrete Pumps
The trailer-mounted concrete pump is a very common piece of construction equipment; favored by contractors for its compact size, ease of transport, and cost-effectiveness.
What causes the S-pipe of a concrete pump to not swing properly?
The S-tube is a crucial component of a concrete boom pump. Its primary function is to connect the boom's piping to the concrete delivery cylinder, enabling continuous concrete pumping.