The JH5200THB-20m concrete pump truck is a high-quality, medium-to-short boom pump truck meticulously crafted by Jiuhe Heavy Industry. It is a highly efficient concrete conveying equipment that integrates driving, pumping, and placing functions.

This pump truck combines high reliability, high economy, high safety, and high durability. The chassis, power, electrical control, hydraulic, and pumping systems are optimally matched.

The boom extends and retracts flexibly and quickly, the outrigger footprint is small, and the entire vehicle is easy to move, making it maneuverable and stable.

Specifically developed for the rural market, the specialized chassis can easily handle muddy and narrow rural roads, exhibiting excellent passability. Employing a flexible four-section boom design and single-sided support technology, construction in confined spaces is easily achievable.

● Specifically manufactured for the construction of new, low-to-medium rise rural buildings

● Specifically manufactured with a short boom design for high-speed rail construction

● National VI emission standard design for greater energy efficiency and environmental protection

● The hydraulically controlled automatic reversing of the pumping system makes maintenance easier

● 18-63m boom, suitable for high-speed rail construction methods

● X-shaped outrigger design for more stable and safer operation

● Extremely high cost-effectiveness, easily helping contractors increase profits

JH5200THB-20m Concrete Pump Truck Performance Characteristics:

Chassis and Power System: Uses FAW Jiefang, China National Heavy Duty Truck, and BAIC Foton heavy-duty chassis, offering strong load-bearing capacity, good power performance, and low fuel consumption; features include fuel efficiency, reduced energy consumption, and convenient maintenance.

Pumping Hydraulic System: A fully hydraulic control system uses oil pressure to transmit signals, making operation simpler and more reliable, increasing the speed of cylinder reversing, reducing reversing impact, and simultaneously accelerating the instantaneous action of large cylinder reversing to fill the concrete cylinder, resulting in strong material continuity and uniform discharge.

Boom and Outrigger Hydraulic System: The boom uses a load-sensitive proportional control system, allowing for smooth and precise boom speed control; it not only enables stepless variable speed remote control but also allows for emergency manual operation; the outrigger and boom oil circuits switch directly, avoiding misoperation and ensuring the safety of the pump truck during construction.

Boom: Based on precise data support from finite element analysis, dynamic analysis calculations, and experiments. High-strength, low-alloy steel plates are used as materials, and all materials and welds undergo 100% non-destructive testing to ensure a reasonable and reliable boom structure.

Electrical Control System: A simple and reliable electrical control system uses Schneider Electric components and is equipped with both panel and wireless remote control devices. It uses a well-known brand wireless remote control that conforms to ergonomic design principles, with an aesthetically pleasing design and light, flexible operation.

Parameters

20M concrete pump truck
• Chassis
Chassis	Jiefang/Foton
Emission Standard	VI
Engine	CA6DLD 22E6
Engine Horsepower	220
Wheelbase	4800mm
Maximum Speed	89
Tire Specifications	11.00R2018PR
• Boom System
Boom Vertical Height	20m
Boom Horizontal Placing Radius	17m
Placing Depth	11.8m
Rotation Angle of Each Boom Section	90°/180° /230°245°
Boom Control Mode	Constant Pump
Slewing Tower Rotation Angle	470°
Front Outrigger Span	5842mm
Rear Outrigger Span	4253mm
Front and Rear Outrigger Longitudinal Distance	6259mm
Outrigger Deployment Method	X-H
Tail Pipe Length	3000mm
Minimum Boom Deployment Height	5.4m
Concrete Conveying Pipe Diameter	125mm
• Electrical System
Control Power Supply	24v
Control Module	Relay
Operating Voltage	24
Intermediate Electrical Component Brand	Siemens
Wireless Remote Control Brand	HBC Domestically well-known brand
• Hydraulic Transmission System
Hydraulic System Type	Open
System Operating Pressure	31.5Mpa
Main Hydraulic Pump Brand	Bosch Rexroth
Main Pump Model	A11VO190
Main Pump Displacement	190
Suction and Return Oil Filter Cartridge Brand	Liming Hydraulic
Boom Multi-way Valve Brand	Hawley/Norma
Boom Balance Valve Brand	Italy
Outrigger Multi-way Valve Brand	Italy Taiwan Oil Power
Hydraulic Cylinder Seal Brand	Parker (USA)
Hydraulic Tank Capacity	400
Hydraulic Oil Cooling Method	Air Cooling
Main Hydraulic Cylinder	Domestically well-known brand
Transfer Case Brand	Jiepai Sabo Zhuchi
Hose Fitting Brand	Eaton
Dimensions & Weight
Overall Length	9538mm
Overall Width	2350mm
Overall Height	3375mm
Gross Vehicle Weight	18.3T
Upper Structure Weight	12.5T
Pumping System
Concrete Distribution Valve Type	S Valve
Concrete Piston Brand	Domestic
Pumping Cylinder Specifications	140/80
Maximum Concrete Outlet Pressure	8Mpa
Theoretical Maximum Pumping Capacity	105
Delivery Cylinder Inner Diameter/Stroke	230*1450
Theoretical Maximum Number of Cycles
Hopper Capacity	0.8m³
Pumping Capacity Concrete Slump	160-220
Maximum Allowable Aggregate Size	40mm
Lubrication Method	Centralized Lubrication

Application Description

Concrete pump trucks are more flexible, reliable, stable, and safe. They are the preferred concrete equipment widely used in tunnels, airports, seaports, high-speed railway construction sites, beam yards, and bridge construction projects.

Advantages of Jiuhe Concrete Pump Trucks:

Intelligence

Full hydraulic control technology.

Rapid fault location, fault detection saves more than 50% of time.

Electrical Control System.

Intelligent electrical control system, simple structure, reduces electrical faults.

Safety

Automatic hydraulic oil level detection and heat dissipation technology.

Automatically detects hydraulic oil and temperature, protecting the hydraulic system.

Intelligent safety technology.

All welds are 100% non-destructively tested.

High Efficiency

Full hydraulic reversing technology.

Reversing time reduced by 10%, pumping efficiency increased by 20%.

Advanced boom structure technology.

Flexible and efficient placement, no blind areas.

Transportation and Packaging

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

We can transport machinery by various means of transport:

(1) In most cases, machines will be shipped by sea, such as container ships (including special container flat racks) or roll-on/roll-off ships/bulk carriers;

(2) For China's inland neighboring countries, it can be sent by road or rail;

(3) For urgently needed spare parts, we can send them via international express services such as DHL, FEDEX, TNT or UPS.

25M concrete pump truck

17M concrete pump truck

Factory Description

Qingdao Jiuhe Heavy Industry Machinery Co., Ltd. was established in 2011 and is a national high-tech enterprise that integrates research and development, production, sales, and service. The main products include engineering machinery, high-altitude machinery, agricultural machinery, emergency equipment, petroleum equipment, etc..We are a new high-tech enterprise with more than 200 patents.Choose us, you can absolutely feel free on after-sale service. Customer satisfaction is our pursuit. Long-term cooperation is our goal, mutual benefit and win-win result are our principle. If any products interest you,kindly contact us. Quality machine together with warm and attentive service are waiting for you!

Panoramic VR

Why Choose Us?

Qingdao Jiuhe Heavy Industry Machinery Co., Ltd. "Advanced technology, reliable quality."

R&D

We are a high-tech enterprise leading by experienced CTO that exceed 30 years. The strong support of the JUHE team will provide you with high-quality enjoyment.

Innovation

JUHE has a strong technical innovation team with more than 200+ national patents!

Strict Quality Control

We conduct five advanced tests before delivery to ensure our product quality. Perfect quality can save your time and money.

Factory

With a total investment of 680 million yuan, current intelligent Industrial Park, equipped with production workshops, R&D centers, comprehensive buildings and ancillary buildings totaling 76,500 square meters.

After-Sales Service

Digital commitment system, clear service standards and payment basis, value chain covering the entire product life cycle, global service engineers ensure worry-free.

Recruiting Distributors Or Dealers

If you are looking for a suitable business opportunity to cooperate more deeply with Chinese factories, then please do not hesitate to contact us!

Customer Visits

Welcome your guests to visit us and create a brilliant future together!

Quality Control

Quality is the base, Innovation is the soul, JUHE always stands in the position of the customers.

FAQ

Solving problems and improving service quality

ARE YOU MANUFACTURER AND WHAT IS YOUR BRAND?

Yes, we are professional manufacturer, and our Brand is “JH”,”JUHE”and “JIUHE”.

OEM OR ODM IS AVAILABLE?

Yes, we can produce with your logo.

HOW IS YOUR DELIVERY TIME?

If standard machine, the delivery time will be 7-15 days, if customized version, that depends on the customized configuration time.

HOW SOON CAN YOU RESPOND CLIENT INQUIRIES?

Our team is professional working 24*7 to respond client inquiries in time. Most problems can be solved within 6 hours.

WHICH PAYMENT TERMS CAN YOU ACCEPT?

Normally we can work on TT or LC. (1)T/T: 30% prepayment to start production and 70% balance shall be paid before shipment; (2)L/C: 100% irrevocable LC at sight without "soft clauses" from an international recognized bank can be accepted.

WHICH INCOTERMS 2010 TERMS CAN YOU DO?

As per client's requirement, we can handle all INCOTERMS 2010 terms, and we normally work on regular terms such as FOB.CFR.CIF.CIP.DAP.

HOW LONG WILL YOUR PRICE BE VALID?

Our original RMB prices keep stable for 1 year. We only adjust price based on two situations. (1)The rate of USD: RMB varies significantly as per international currency exchange rates. (2)Our factory experiences increasing labor costs and raw material costs.

WHAT LOGISTICS WAYS YOU CAN WORK FOR SHIPMENT?

We can ship machinery by various transportation ways: (1)Mostly, the machines will be shipped by sea such as container ship (include special container flat rack) or Ro-Ro / Bulk ship; (2)For inland neighborhood countries of China the machines can be sent by road or railway; (3)For the spare parts in urgent requirement we can send them by international courier service such as DHL. FEDEX, TNT or UPS.